New Products

1. MV Anna Marie (Ref: DM87)
2. Hectoperm Motor 2:1 12v (Ref: M68040)
3. Hi Tech Zebra 4 Channel (Ref: HF49/40)
4. Large Ship Horn (Ref: AE9071)
5. Large Ship Steam Whistle (Ref: AE9078)
6. High output 12v Smoke Generator (Ref: GR2390)
7. Machine Gun (Ref: AE9046)
8. HMS Daring D32 (2008) 1:96 (Ref: JEC60)
9. HMS Astute (2008) (Ref: JEC61)
10. 10mm double wooden working block (Ref: RB06506)
11. Glasgow Paddle Tug (Ref: GR2126)
12. FD10 Sailing Trawler (Ref: B701)
13. Marie Jeanne (Ref: B580)
14. 26ft launch kit, (Ref: CCF1053)
15. Viper Micro Marine 10 (Ref: MVM10)
16. Gato Class Submarine (Ref: RV05047)
17. Old Steam Whistle (Ref: AE9080)

Winches

Online Catalogue | Ship Fittings | Caldercraft Modern Fittings | Winches

1:32 Scale Steam capstan. Ref: FS9
1:32 Scale (as fitted to Imara). Steam capstan. Cast one piece lower body with open side viewing ports. Inner cast bed plate fitted with internal twin horizontal cylinders, crossheads and crank discs. Valve and steam pipe. Multi piece capstan barrel and head. Eight capstan bass for hand operation with their upper and lower stowage brackets for bulkhead fitting. 35x38x53mm
Price: £18.98/€24.67 (Including VAT at 17.5%)

Quantity:

1:48 scale Steam or electric capstan. Ref: FS8
1:48 scale (as fitted to Talacre). Steam or electric capstan. The lower workings are enclosed in a box bed of four parts ,which has rivet detail, hinges and door latch. One piece capstan body and head. Angles fitted to body sides for supports to wing gratings which are included 25x30x26mm
Price: £8.55/€11.12 (Including VAT at 17.5%)

Quantity:

1:48 Anchor Windlass Ref: FS7
1:48 Scale Anchor Windlass (as fitted to Joffre). Cast body, wood lower base plate, one piece capstan head and body. Outside steam horizontal cylinders valve and steam pipe. 20x20x38mm
Price: £6.69/€8.70 (Including VAT at 17.5%)

Quantity:

1:48 Ryehope). Electric motor drive winch Ref: FS6
1:48 Scale (as fitted to Ryehope). Electric motor drive winch. A one piece casting incorporating motor, two anchor chain wheels, two warping drums and small bed plate. Suitable for small tug, launch etc. 7x35x23mm
Price: £3.80/€4.94 (Including VAT at 17.5%)

Quantity:

1:48 Scale Hand cranked windlass. Ref: FS5
1:48 Scale (as fitted to Garnock). Hand cranked windlass. Cast two part raised bed plate with triangular webbed side frame incorporating deck hawse pipe opening. Cast gearing, single anchor chain wheel, clutch lever and brake handle. Twin warping drums. Ideal windlass for small harbour tugs, launches etc.20x33x45mm
Price: £5.69/€7.40 (Including VAT at 17.5%)

Quantity:

Electric or hydraulic anchor windlass Ref: FS4
Electric or hydraulic anchor windlass 1:24 Scale (as fitted to Celia. Wooden block body single anchor chain wheel, single warping drum, operating lever; and bull ring chain guide. This windlass is fitted to many small fishing boats, launches, pleasure craft, etc. 30x25x25mm
Price: £3.80/€4.94 (Including VAT at 17.5%)

Quantity:

Steam anchor windlass 1:48 Scale Ref: FS3
Steam anchor windlass 1:48 Scale (as fitted to, Joffre Talacre, Sir Kay). Twin horizontal cylinders, cast bed plate with open webbed triangular side frames. Hand cranking gear. twin anchor wheels and warping drums, brake handles, chain slides incorporating deck hawse pipe holes. 34x35x20mm
Price: £8.57/€11.14 (Including VAT at 17.5%)

Quantity:

Steam anchor windlass 1 :32 Scale Ref: FS2
Steam anchor windlass 1 :32 Scale (as fitted to tug Imara). Twin vertical cylinders. Cast bed plate with open webbed triangular side plates and separate lay shafts and supporting webbed frames. Fitted with Joy valve gear, lubricators, steam lever, valve and associated lagged pipe work. Twin anchor chain wheels, twin warping drums, brake and clutch levers and hand cranking gear. An unusual type of steam anchor windlass for fitting where space was limited. 55x70x60mm
Price: £33.01/€42.91 (Including VAT at 17.5%)

Quantity:

1 :48 Scale 20mm Oerlikon Ref: FS17
1 :48 Scale 20mm Oerlikon Gun Single barrel. Highly detailed on MK1 elevating mounting. Separate shield, magazine, sight elevating wheel, shoulder pads. 35x23x54mm.
Price: £7.10/€9.23 (Including VAT at 17.5%)

Quantity:

1:48 Scale Naval searchlight. 40x25x25 Ref: FS16
1:48 Scale Naval searchlight as fitted to Sir Kay. Detailed body, cradle and conical mounting. Elevating and training hand wheels 40x25x25
Price: £6.69/€8.70 (Including VAT at 17.5%)

Quantity:

Brail/Lee Board Winch Ref: FS14
Brail/Lee Board Winch . Twin rounded top, webbed open end frames. Single winch drum and gearing for hand operation. Single warping drum. 45x50x35mm.
Price: £7.10/€9.23 (Including VAT at 17.5%)

Quantity:

1:32 Scale hand operated winch Ref: FS13
1:32 Scale (as fitted to Cumbrae No. 1). A hand operated winch of a type for operating small cargo hoists, small boat lifting etc. Plain triangular, flat topped side plates with angle bases. Worm and worm wheel gear and handle. Single rope drum, top cross stays. 29x26x30mm
Price: £6.64/€8.63 (Including VAT at 17.5%)

Quantity:

1 :48 Scale Anchor Windlass (as fitted to Talacre) Ref: FS12
1 :48 Scale Anchor Windlass (as fitted to Talacre). Steam. Wooden base plate, rectangular webbed open side frames. Twin outside inclined cylinders with guides, crossheads and crank discs, operating lever incorporating hand brake. Lay shaft and four warping drums. Single winch rope drum and associated lagged pipework. 20x60x40mm
Price: £14.25/€18.52 (Including VAT at 17.5%)

Quantity:

Celia. Hydraulic modern twin drum trawling winch Ref: FS11
1:16 Scale (as fitted to Celia. Hydraulic modern twin drum trawling winch of a type fitted to many coastal fishing craft. Webbed rectangular side plates fitted to angle iron plate bearers. Twin cast wire rope reels fitted with separate cast end discs mounted either side of the gear box and hydraulic motor. Front guide rollers and frame with rack and pinion operated from car type steering wheel. Twin brake handles warping drums and separate controller box and handle.65x90x70mm
Price: £28.46/€37.00 (Including VAT at 17.5%)

Quantity:

1:32 Scale Steam cargo/Anchor windlass Ref: FS10
1:32 Scale Steam cargo/Anchor windlass (as fitted to Northlight). Steam. Wooden base plate, rectangular webbed open side frames. Outside horizontal cylinders, crossheads, guides and crank discs. Reversing lever with brake and quadrant. Foot operated band brake. Four warping drums incorporating one anchor chain wheel. Associated pipe work and valve.35x70x60mm
Price: £24.55/€31.92 (Including VAT at 17.5%)

Quantity:

Steam 1:24 Scale anchor windlass Ref: FS1
Steam 1:24 Scale anchor windlass (not yet fitted to any Calder Craft boat kits) Twin horizontal cylinders with hand cranking gear, clutch, steam and brake levers. Twin anchor chain wheels, twin warping drums. Cast bed plate with open webbed triangular side frames associated pipe work, valve and lubrications. Fitted with brake and clutch levers and visible valve rods and eccentrics. 55x65x70mm
Price: £28.46/€37.00 (Including VAT at 17.5%)

Quantity:

Online Catalogue | Ship Fittings | Caldercraft Modern Fittings | Winches