Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Plastic water scoop & outlet

Plastic water scoop & outlet

Plastic water scoop & outlet. Smart black lightweight scoop and outlet with brass nuts. Suitable for intake for water pump units

find out more

1.99 / US$2.46

MTB Vosper St.Nazaire Raid MTB 74

MTB Vosper St.Nazaire Raid MTB 74

MTB Vosper St.Nazaire Raid MTB 74 1:35 scale 632mm

find out more

99.98 / US$123.31

Marine Modelling Magazine April 2015

Marine Modelling Magazine April  2015

Marine Modelling Magazine April 2015

find out more

4.25 / US$6.29

Ixplorer hydrographic survey vessel

Ixplorer  hydrographic survey vessel

Ixplorer : This is a plan drawn by James Pottinger to 1:50 scale is of a modern hydrographic survey vessel, still in service in the 21st Century. Its accompanying article was published in August 2014 Model Boats and that included detail pictures of the full-size vessel. No constructional advice is given on the two sheet of the plan, but there is sufficient information for a model to made as the hull lines and profiles are all included.

find out more

12.50 / US$15.42

Trumpeter HMS Nelson 1:200 scale 1082mm

Trumpeter HMS Nelson  1:200 scale 1082mm

Trumpeter HMS Nelsoni 1:200 scale 1082mm

find out more

229.94 / US$283.60

Coastal Craft History Volume 1

Coastal Craft History Volume 1

Coastal Craft History Volume 1: Vosper Motor Torpedo Boats.From 68ft PV boat to MTB 538

Coastal Craft History Volume 1.Vosper Motor Torpedo Boats.From 68ft PV boat to MTB 538.Profiles and Text:Mark Smith.Profiles based on the drawings of John Lambert. The Colour profiles in this book detail the colour schemes and equipment of Vosper MTB's from job 1763 (MTB 102) to MTB 538,the last boat ordered during wartime.

find out more

17.99 / US$26.63

Anchor Winch 21mm wide x 25mm long x 34mm high

Anchor Winch 21mm wide x 25mm long x 34mm high

Anchor Winch 21mm wide x 25mm long x 34mm high

find out more

4.38 / US$5.40

Anchor Winch 40mm wide x 27mm long x 14mm high

Anchor Winch 40mm wide x 27mm long x 14mm high

Anchor Winch 40mm wide x 27mm long x 14mm high

find out more

5.84 / US$7.21

spacer

Fishing Boats

Online Catalogue | Ship Plans | Marine Modelling Magazine Plans |  Fishing Boats

Trawler St Giles Trawler St Giles
Ref: MAR3620
Trawler St Giles: This side trawler was involved with the Icelandic cod war during 1975 and had her trawl lines cut during the dispute. When the 200 mile fishing limit around Iceland was enforced she was sold to the Sea Shepherd Conservation Society and renamed Sea Shepherd II

Full details are shown on the plan of the construction of the hull and superstructure from which an experienced modeller can build an accurate model but no model construction data shown.

BEAM: 20 cm (8 inches)
LENGTH: 122 cm (48 inches)



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Margaret Rose Margaret Rose
Ref: MAR3075
Margaret Rose: Two sheet drawings at 1:48th scale for a large model 1000mm length and 160mm beam of a steam powered trawler. No model construction data. Designer Jim Pottinger



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


M V Venture M V Venture
Ref: MAR3160
M V Venture: Two sheet plans fora modern fishingtrawler built 1991by J Millers in Fife.Model length 985mm beam 290 mmat 1:25th scale fulldetails of original butno model constructiondata. Designedby Jim Pottinger.



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Santa Audrey Santa Audrey
Ref: MAR3221
Santa Audrey: Mediteranean Style fishing boat with typical flared bow. Designed for building in timber and styrene blocks but could be planked. Model size is 540 mm length and 150 mm beam weight 2.5 kg and plans shows model construction and jigs. Designed by David Heaps



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Swiftwing Swiftwing
Ref: MAR3255
Swiftwing: Modern 10 Metre Rule trawler at 1:16th scale double chine hull and shelterdeck. Details of full size vessel but no model construction data. Designer Jim Pottinger



Price: 15.00 / US$18.50 (US$ Tax Free Price)


Quantity:  


M V Antaries M V Antaries
Ref: MAR3432
M V Antaries: A 3 sheet detailed plan of a modern fishing trawler. With a bulbous hull. Drawn at 1:25 scale from the original shipyard plans for the experienced modeler as no model construction shown. Designer Jim Pottinger



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Santa Audrey Santa Audrey
Ref: MAR3470
Santa Audrey: Mediteranean Style fishing boat with typical flared bow. Designed for building in timber and styrene blocks but could be planked. Model size is 540 mm length and 150 mm beam weight 2.5 kg and plans shows model construction and jigs. Designed by David Heaps



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Norseman Norseman
Ref: MAR3258
Norseman: Chine hulled Scottish Salmon fishing boat at 1:20 scale of practical length to beam ratio length 675 mm and beam 280 mm. Plans for the original boat with no model construction data. Designer Jim Pottinger



Price: 15.00 / US$18.50 (US$ Tax Free Price)


Quantity:  


Wanderer III Wanderer III
Ref: MAR2228
Wanderer III A 1:32 scale Trawler, built in Cambeltown in 1984. Plan includes external profiles plus full hull lines. A second sheet gives basic details of plank on frame construction, for a model of 650mm length and 200mm beam.



Price: 12.00 / US$14.80 (US$ Tax Free Price)


Quantity:  


Internos 11 Internos 11
Ref: MAR2251
Internos 11A 1:30th scale 80ft Seiner built in 1985. The plan on two sheets includes both full size detail and model building lines and frames.



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Andromeda I Andromeda I
Ref: MAR2257
Andromeda II A 1:30th scale 87ft Seiner built in 1985. Fully detailed two sheet plans, with full sized detail, deck plan and scrap views of hatches, etc. and construction data for a model of 875mm length and 150mm beam.



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Boston Fury Boston Fury
Ref: MAR2281
Boston Fury A 1:48th scale 1960 East Coast Trawler. Large model to suit Decaperm 12v motor, very full plans with lots of scale detail for a model 1125mm length and 175mm beam.



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Tina Jane Tina Jane
Ref: MAR2284
Tina Jane A 45ft stern trawler at 1:24th scale, model size 560mm long by 200mm beam, intended for electric drive. Straightforward modellers plan which suggests the use of many scrapbox items, to build deck details. Full size frames, keel and main cabin shapes.



Price: 12.00 / US$14.80 (US$ Tax Free Price)


Quantity:  


Hoop Op Zegen Hoop Op Zegen
Ref: MAR2326
Hoop Op Zegen Two sheet plans for a 1:50th scale model Beamer trawler from Holland, drawn in great detail. Full model construction shown, and fishing tackle included. Model size 725mm long, 150mm beam.



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Marie Joseph Marie Joseph
Ref: MAR2389
Marie Joseph A freelance scale French fishing vessel, based on the typical Brittany coast fleet, drawn to a practical 1:16th scale. Model size is 870mm length, and 150mm beam, which gives plenty of room internally for RC and equipment. Fully detailed over three issues



Price: 12.00 / US$14.80 (US$ Tax Free Price)


Quantity:  


Pride O Fife Pride O Fife
Ref: MAR2396
Pride O' Fife A 1:32nd scale model steam trawler for electric power, on two sheets, the second of which gives all hull lines. Model is 880mm long by 178mm beam.



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Eleanda Eleanda
Ref: MAR2413
Eleanda A 1:30th scale 1988 seine netting trawler, plans on two sheets. The first gives full size data, and the second all frames, buttocks and half breadth deck. No model construction details. For electric power and two function r/c.



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Orca (Jaws) Orca (Jaws)
Ref: MAR2463
Orca (Jaws) A scale model of the fishing boat featured in the film. Model size 900mm loa., including forward walkway, and 225mm beam. For electric power and straightforward construction in ply and balsa.



Price: 12.00 / US$14.80 (US$ Tax Free Price)


Quantity:  


Froyliner Froyliner
Ref: MAR2467
Froyliner A modern longline fishing boat at 1:48th scale. Model size 800mm by 195mm, on two sheets. Full size data only, no model construction shown.



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Osprey Boat Osprey Boat
Ref: MAR2476
Osprey Superb and detailed plans of a Scottish wooden fishing boat, a model of 500mm Loa. and 140mm beam, on no less than eight pages, packed with general information.



Price: 31.50 / US$38.85 (US$ Tax Free Price)


Quantity:  


Aurora Aurora
Ref: MAR2798
Aurora: The well known Cygnus Marine 44 GRP fishing boat hull, with transom stern, open after deck, forward wheelhouse and raised forecastle. Whilst not a named boat the arrangement and rig is typical of the small inshore trawlers. Drawn on two sheets, showing general arrangement, all deck details and full hull lines and body plan at a scale of 1:18 to give a heavy displacement model 735mm long and 280mm beam. Designed by Jim Pottinger.



Price: 15.00 / US$18.50 (US$ Tax Free Price)


Quantity:  


Rymaralee Rymaralee
Ref: MAR2837
Rymaralee Two sheet plans for the 1988 steel Seine Net fishing boat, at 1:30th scale 800mm Loa and 240mm beam. Alternative fishing arrangements shown, but no model construction data. Designed by Jim Pottinger. January 2001 MMI



Price: 17.50 / US$21.58 (US$ Tax Free Price)


Quantity:  


Online Catalogue | Ship Plans | Marine Modelling Magazine Plans |  Fishing Boats

spacer
spacer