Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

100mm long x M2 threaded propshaft

100mm long x M2 threaded propshaft

100mm long M2 threaded Stainless Steel shaft running inside a 50mm tube with Brass bearings. Tube dia 6mm. The inboard end of the shaft is stepped, so will accept an M4 or M3 plain coupling insert

find out more

6.92 / US$8.31

Fairey Huntsman 31

Fairey Huntsman 31

Fairey Huntsman 31: This is a two sheet plan for the classic Fairey 1960's powerboat drawn to a scale of 1:16 and designed by David Milbourn as a radio controlled, brushless motor driven, highly detailed performance model. A fully illustrated supporting article was published in the Model Boats 2016 January and February issues.

This project is recommended for those with some experience of building a wooden-hulled model using these highly detailed and comprehensive CAD drawn plans. Model length at 1:16 scale is 24 inches (590mm).

find out more

12.50 / US$15.00

Model Boats Magazine February 2016

Model Boats Magazine February 2016

Model Boats Magazine February 2016

This issue we have the second part of the Fairey Huntsman full-build article, the plan being featured in the recent January 2015 issue and available from MyHobbyStore. We are pleased to include this month, instead of the usual Ship Gallery, a Photo Feature Gallery for a Lesro Sportsman, this r/c model having been started by Les' Rowell the designer just before his untimely death in 1992, and now completed by his grandson John Long 23 years later, it having languished in a loft during the intervening years.

Included in this issue are full photographic reports from the 2015 International Model Boat Show held at Leamington Spa this last November and Scale Model World organised by the International Plastic Modellers Society at Telford at the same time. This latter event has much of interest to model boating enthusiasts, not least because of the huge and fantastically detailed 1:200 scale Trumpeter plastic kits of famous warships, including HMS Nelson and soon to be released HMS Hood, models that readily lend themselves to radio control conversion and that were on display or being previewed.

Apart from this, we have the usual regulars including a look by John Parker at the once well-known Marinecraft kits marketed by Model Aerodrome Ltd, once a leading UK chain of model shops. So together with the usual regular columns, I hope there is something here for everyone in these pages

find out more

4.75 / US$6.84

Marine Modelling Magazine February 2016

Marine Modelling Magazine February 2016

Marine Modelling Magazine February 2016

find out more

4.50 / US$6.48

Talisman Paddle Steamer

Talisman Paddle Steamer

Talisman Paddle Steamer: A 56in long by 7in beam Clyde Diesel Electric Paddle Vessel with details for a simple or feathering type of paddle wheel. Profile, plan and body lines.

find out more

22.50 / US$27.00

Liferaft Canister 12mm long x 6mm dia

Liferaft Canister 12mm long x 6mm dia

Liferaft Canister 12mm long x 6mm dia Brass

find out more

0.56 / US$0.68

Marine Modelling Magazine January 2016

Marine Modelling Magazine January 2016

Marine Modelling Magazine January 2016

find out more

4.50 / US$6.48

95mm propshaft with 125mm shaft M3

95mm propshaft with 125mm shaft M3

95mm long tube x 5mm dia 3mm threaded Propshaft. Shaft is 125mm long with M3 tread at the prop and and M3 plaiin at the motor end. All brass construction.

find out more

9.98 / US$11.98

Working Fire-fighting monitor 80mm high with 90mm reach

Working Fire-fighting monitor 80mm high with 90mm reach

Semi-scale model of a vertically and horizontally rotating fire-fighting canon. Can be made fully functional. Consists of injection-moulded plastic parts and metal tubes, which makes assembly very easy. Suitable for many models.80mm high with 90mm reach

find out more

22.34 / US$26.81

Trumpeter HMS Rodney 1:200 scale 1082mm

Trumpeter HMS Rodney  1:200 scale 1082mm

Trumpeter HMS Rodney 1:200 scale 1082mm

find out more

206.95 / US$248.34

Capstan 8mm high x 8mm dia

Capstan 8mm high x 8mm dia

Capstan 8mm high x 8mm dia brass

find out more

0.68 / US$0.82

4mm Ribbed Rubber Bumper Sheet 300mm x75mm x 2.5mm

4mm Ribbed Rubber Bumper Sheet 300mm x75mm x 2.5mm

4mm Ribbed Rubber Bumper Sheet 300mm x75mm x 2.5mm. As used as bow fenders and areas on hull sides where protection is needed. The sheet has 4.0mm wide rib running vertically along the 75mm width One sheet per pack

find out more

8.83 / US$10.60

Mouse for forestay 3.8mm long x3.8mm dia (10)

Mouse for forestay 3.8mm long x3.8mm dia (10)

Mouse for forestay 3.8mm long x 3.8mm dia, accepts 1.7mm dia cord (10)

find out more

1.54 / US$1.84

2.0mm rubber fender strip 2 mtr

2.0mm rubber fender strip  2 mtr

2.0mm x 2.0mm rubber fender strip with 0.5mm wide slot on back side. Comes supplied in 2 metre lengths.

find out more

13.46 / US$16.16

spacer

Harold Underhill Powered Ship Plans

Online Catalogue | Ship Plans |  Harold Underhill Powered Ship Plans

The drawings described in this list have been produced to meet the needs of those wishing to build authentic scale models, and every care has been taken to ensure accurate detail. In the case of named ships they have been compiled from the original builders' plans and specifications, personal survey of the actual vessel, or both. Where possible, any changes made during the life of the ship have been noted on the drawings.

Please Note: Plans are printed to order and take about 10 -14 days to print.


Cunard Liner Servia

Cunard Liner Servia

Ref: 1004/1006

Price: 33.30 / US$39.96 (US$ Tax Free Price)

Quantity:

Cunard Liner Servia, The transition period from sail to steam in the Ocean Passenger Services is one which has been sadly neglected by the model builder, yet it offers some really fascinating ships, combining interesting features of both eras, and a very good example of this class was the Cunarder SERVIA built by J. & G. Thomson of Glasgow in 1881. She was a vessel of 7,392 tons gross and might truly be described as one of the ocean greyhounds of her period, a long sleek steel vessel carrying a modified barque rig and two raking funnels, she looked and was a real thoroughbred.

From the model-man s point of view she has much to offer, providing plenty of scope for fine detail about her docks and superstructure without the monotonous repetition work of multitude of identical fittings to be made for the modern liner. Her rig too provides the interesting features of a sailing ship's spars without the amount of detail found in the true square-rigger, while lastly, it is out of the ordinary run of models. 1:192 scale 850mm


Steam Tug

Steam Tug

Ref: 103/104

Price: 19.68 / US$23.62 (US$ Tax Free Price)

Quantity:

Steam Tug, The Steam Tug is always popular with the model builder, and the following drawings, which have the underwater body increased to give ample displacement for a small working model, are based on one of the well-known Mersey types.1:96 scale 616mm


Ocean Going Motor Yacht

Ocean Going Motor Yacht

Ref: 105/106

Price: 19.68 / US$23.62 (US$ Tax Free Price)

Quantity:

Ocean Going Motor Yacht, This set is intended to produce a simple representative model which, while having few fittings to damage in transit, has a fine appearance afloat. The drawings are not based on any particular vessel 1:96 scale 609mm


Clyde Puffer Sealight

Clyde Puffer Sealight

Ref: 1119/1120

Price: 19.68 / US$23.62 (US$ Tax Free Price)

Quantity:

Clyde Puffer Sealight, The Clyde Puffer was the most numerous type of trading vessel on the coasts of Scotland, while in the Clyde they were to be seen in their dozens. Although built to trade all round the coast and as far afield as Ireland, the puffer was small enough to use the Crinan Canal as a short-cut through the Kintyre isthmus, which for model work means that even a large scale produces a relatively small hull. The plans are drawn to a scale of 1:48 , on which even the winch can be reproduced with complete accuracy, yet the O.A. length of the model is only 588mm .


770 Ton Steel Motor Yacht

770 Ton Steel Motor Yacht

Ref: 1153/1156

Price: 44.41 / US$53.29 (US$ Tax Free Price)

Quantity:

770 Ton Steel Motor Yacht, Although designed as a working model, the hull is to scale dimensions with very complete detail and therefore quite suitable for a showcase model if desired. 1:48 . Hull length 1066mm


Iron Paddle Tug

Iron Paddle Tug

Ref: 1157/1160

Price: 44.41 / US$53.29 (US$ Tax Free Price)

Quantity:

Iron Paddle Tug, The fussy little Paddle tug, which until quite recently was such a common sight in all our ports, forms an out-of-the-ordinary working model of great interest, and the following plans cover one of these vessels in complete detail.

Working constructional plans for scale feathering paddles are included together with details of a simple paddle with fixed floats if that is preferred. Machinery layout for electric drive.

Specification and table of weights completes all the data required for a perfect model 1:48 scale Hull length863mm


Working Model Paddle Steamer

Working Model Paddle Steamer

Ref: 1161/1164

Price: 57.60 / US$69.12 (US$ Tax Free Price)

Quantity:

Working Model Paddle Steamer, Although designed as a working model, these designs include all details down to electric light fittings, ship-to-shore gangways and mooring lines. Working drawings of both feathering and simple fixed-float paddles are provided. 1:48 scale Hull length 1270mm


Sea Going Tug

Sea Going Tug

Ref: 1166/1168

Price: 33.30 / US$39.96 (US$ Tax Free Price)

Quantity:

Sea Going Tug, This fine tug, which has been drawn complete to the smallest detail. Available in 1:48 scale scale, providing ample displacement for radio control in a scale hull suitable for either steam or electric power 762mm


Sea Going Tug

Sea Going Tug

Ref: 1170/1172

Price: 43.20 / US$51.84 (US$ Tax Free Price)

Quantity:

Sea Going Tug, This fine tug, which has been drawn complete to the smallest detail. Available in 1:32 scale scale, providing ample displacement for radio control in a scale hull suitable for either steam or electric power. 1143mm


Modern(1950) Motor Trawler

Modern(1950) Motor Trawler

Ref: 1173/1175

Price: 33.30 / US$39.96 (US$ Tax Free Price)

Quantity:

Modern(1950) Motor Trawler, These plans will produce a model of scale dimensions and up to showcase Standard in fittings, yet with ample displacement for a good working model. Full working drawings of all fittings are included. 1:48 scale 1085mm


Coastal and Bunkering Tanker

Coastal and Bunkering Tanker

Ref: 1177/1179

Price: 33.30 / US$39.96 (US$ Tax Free Price)

Quantity:

Coastal and Bunkering Tanker, A familiar sight in all large ports and estuaries is the small Tanker employed bunkering the big ships and on coastwise passages to near-by-harbours. Their low side docks usually, awash in anything but flat calm water. remind one of the old turret ships. This type of vessel forms a new and unusual subject for model work, yet, thanks to its large displacement and ample space below docks, well suited for radio control. 1:48 scale 1079mm


Liverpool Pilot Vessel

Liverpool Pilot Vessel

Ref: 1180/1182

Price: 33.30 / US$39.96 (US$ Tax Free Price)

Quantity:

Liverpool Pilot Vessel, This fine ship is an excellent subject for either showcase or working models. She has a beautiful profile, without too much superstructure to get damaged in a sailing model.
The scale allows full detail on a hull length which is easy to handle yet has ample displacement to carry plant.
The drawings are detailed to showcase or exhibition standard, and the set includes separate working drawings of all major fittings such as davits, boat-winches. windlass, capstan, lead of falls, etc. 1:48 scale 1104mm


114 ft Streamlined Tug

114 ft Streamlined Tug

Ref: 1183/1185

Price: 33.30 / US$39.96 (US$ Tax Free Price)

Quantity:

114 ft Streamlined Tug, This vessel has many advantages as a working model. being low in build and therefore easy to transport, while the absence of the normal mast and rigging allows the superstructure to be made removable as a complete unit with nothing to be disconnected The hull lines are fine for this type of craft, which results in great flare at bow and stern in spite of the high beam-length ratio which is feature of all Tugs.
The plans are very fully detailed - up to the exhibition standard - including all fittings on the arrangement drawing, with separate plans of each of the detail sheet as well as cross-sectional elevations of superstructure at several points along the hull. 1:32 scale 1092mm


114 ft Streamlined Tug

114 ft Streamlined Tug

Ref: 1186/1188

Price: 33.30 / US$39.96 (US$ Tax Free Price)

Quantity:

114 ft Streamlined Tug, This vessel has many advantages as a working model. being low in build and therefore easy to transport, while the absence of the normal mast and rigging allows the superstructure to be made removable as a complete unit with nothing to be disconnected The hull lines are fine for this type of craft, which results in great flare at bow and stern in spite of the high beam-length ratio which is feature of all Tugs. 1:48 scale 730mm


Steam Pinnace

Steam Pinnace

Ref: 132/133

Price: 19.68 / US$23.62 (US$ Tax Free Price)

Quantity:

Steam Pinnace, The older type Steam Pinnace is well suited as a model where the machinery is of first importance. The hull and fittings are extremely simple, and the power plant can be exposed by merely lifting the casing, while the lack of deck fittings makes for ease in transit. 1;24 scale 609,,


Police Patrol Boat

Police Patrol Boat

Ref: 134/135

Price: 19.68 / US$23.62 (US$ Tax Free Price)

Quantity:

Police Patrol Boat, An excellent subject for a working model. The simplicity of the Deck fittings means easy access to the power plant and little risk of damage in transit to the water. 1:24 scale 609mm


Steam Trawler

Steam Trawler

Ref: 140/143

Price: 39.36 / US$47.23 (US$ Tax Free Price)

Quantity:

Steam Trawler Here we have a type particularly well known to all who have served at or near a Naval Base, where in war time dozens of these vessels are employed in servicing both ships and land forces. This set includes simple alternative machinery layouts for those not wishing to design their own plants 1:60 scale 628mm


Armed Trawler or Fishery Protection Cruiser

Armed Trawler or Fishery Protection Cruiser

Ref: 144/147

Price: 39.36 / US$47.23 (US$ Tax Free Price)

Quantity:

Armed Trawler or Fishery Protection Cruiser. This represents one of the 1914-18 war time conversions, a trawler of the top gallant fo castle type with gun platform and additional boats. Like the previous set alternative simple machinery layouts are available 1:60 scale 628mm


Anchor Liner Circassia

Anchor Liner Circassia

Ref: 930/934

Price: 55.50 / US$66.60 (US$ Tax Free Price)

Quantity:

Anchor Liner Circassia. This set is one of the most fully detailed Liner plans yet produced and includes all information necessary for the construction of a perfect scale model up to Builders Model standard. Separate working drawings of all davits, winches, capstans, etc., are included together with separate details of each mast with its fittings and rigging. Alternative Lines Drawings are available, one for scale showcase models, and the other with increased displacement for working models. 1:96 scale 1600mm


Oil Tanker

Oil Tanker

Ref: 148/149

Price: 19.68 / US$23.62 (US$ Tax Free Price)

Quantity:

Oil Tanker. The importance of the Oil Tanker is fully appreciated in war time when many of them made Naval History. The following drawings are suitable for the construction of a typical vessel of this class. 1:192 scale 622mm


R Class Destroyer

R Class Destroyer

Ref: 150/152

Price: 29.53 / US$35.44 (US$ Tax Free Price)

Quantity:

R Class Destroyer. The Destroyer is perhaps one of the most important ships in the Royal Navy; general maid of all work to the fleet, convoy escort, patrol boat, etc. These drawings are intended for scale models, but lines with increased displacement for small working models are available. 1:120 scale 622mm


R.M.S Queen Mary

R.M.S Queen Mary

Ref: 230/232

Price: 43.20 / US$51.84 (US$ Tax Free Price)

Quantity:

R.M.S Queen Mary. This set, being intended for small scale work and working models, has all the main features and superstructure of the prototype, but without some of the minor details. Above the water-line all principal dimensions and outline have been strictly adhered to, although certain slight modifications have been made for the sake of simplicity. The underwater body has been designed to provide ample displacement for small working models, and is therefore slightly out of scale.1:384 scale 781mm


R.M.S Queen Mary

R.M.S Queen Mary

Ref: 243/246

Price: 49.02 / US$58.82 (US$ Tax Free Price)

Quantity:

R.M.S Queen Mary. This set has been produced in response to a demand for a larger scale and more fully detailed edition of the smaller set 230/232, and is suitable for super detail models. The drawings have been compiled from plans and data furnished by the Cunard White Star Company for that purpose, and I am indebted to them for their assistance and permission to produce this set. 1:192 scale 1631mm


50 ft Motor Cabin Cruiser

50 ft Motor Cabin Cruiser

Ref: 291/293

Price: 29.53 / US$35.44 (US$ Tax Free Price)

Quantity:

50 ft Motor Cabin Cruiser. This set was originally designed for a working model and has the underwater body increased to provide additional displacement, but this type of vessel would make a good showcase model, as owing to the amount of open glass work and companionways, there is plenty of scope for the model maker who cares to furnish the interior, details of which are shown on the third sheet of the set. 1:24 scale 635mm


Steam Coaster, 800 Tons

Steam Coaster, 800 Tons

Ref: 37/38

Price: 19.68 / US$23.62 (US$ Tax Free Price)

Quantity:

Steam Coaster, 800 Tons. The Steam Coaster, with her midship bridge and engines aft, is one of the most familiar types of our time, and is to be found in large ports and small tidal harbours alike. The following drawings have been prepared for the construction of a detailed scale model of one of these interesting craft. 1:120 scale 501mm


Ross-Shire

Ross-Shire

Ref: 500/501

Price: 19.69 / US$23.63 (US$ Tax Free Price)

Quantity:

Ross-Shire Thomas Law's Famous Steel Four-Mast Barque Built 1891. Elevation and Plans of Each Deck, Sail and Rigging Plan,. 739mm


Caledonian Monarch and Celtic Monarch

Caledonian Monarch and Celtic Monarch

Ref: 57/59

Price: 29.53 / US$35.44 (US$ Tax Free Price)

Quantity:

Caledonian Monarch and Celtic Monarch. These two sister ships are typical examples of the Three Island type Cargo Steamer, and the following drawings supply all the necessary information for a super detail model. Alternative lines drawings are available, one for a scale showcase models and the other with increased displacement for small working models 1:192 scale 711mm


Diesel Ring Net Fishing Boat

Diesel Ring Net Fishing Boat

Ref: 650/652

Price: 29.53 / US$35.44 (US$ Tax Free Price)

Quantity:

Diesel Ring Net Fishing Boat. This is one of the 48 ft. bright varnished fishermen so well known in our smaller fishing ports and harbours. The plans, which are to a scale of 1:24 scale, have been prepared to meet the needs of those desiring a really authentic scale model, and are suitable for either showcase or working models. This type of hull is an excellent subject for first class plank on frames construction 615mm


45 feet Motor Picket Boat

45 feet Motor Picket Boat

Ref: 922/924

Price: 43.20 / US$51.84 (US$ Tax Free Price)

Quantity:

45 feet Motor Picket Boat. The modern Naval Picket Boat makes an extremely pleasing model and being relatively small, means that a large scale can be used resulting in very complete detail. The hull is of the hard chine type suitable for composite plywood construction.
The following drawings are to 3/4 scale and very fully detailed, including internal furnishings, so offering plenty of scope for the real craftsman. For working models the motor is installed in the actual engine-room and the accumulator carried between the seats of the covered cockpit, where it is out of sight in use yet instantly removable.
With the accumulator out and the electrical leads below the cockpit floor, the model becomes a perfect A scale showcase model, completely fitted and furnished both inside and out and no power plant visible. 1:16 scale 857mm


90ft Motor Fishing Vessel

90ft Motor Fishing Vessel

Ref: 940/942

Price: 29.53 / US$35.44 (US$ Tax Free Price)

Quantity:

90ft Motor Fishing Vessel. These sturdy Fleet Auxiliaries, designed by the Admiralty on fishing-boat lines and suitable for immediate conversions to fishing when released from service, were well known in all anchorages round our coasts and the following drawings are very fully detailed for a 3/8 model, either working or showcase.

The plans show the vessels as used in the Naval service but include details of the ships as converted for fishing. Size of finished model 1:32 scale 927mm


I.O.M. Packet - Lady of Mann

I.O.M. Packet - Lady of Mann

Ref: L1/L3

Price: 33.30 / US$39.96 (US$ Tax Free Price)

Quantity:

I.O.M. Packet - Lady of Mann. This vessel was built in 1930 by Vickers-Armstrong. Barrow-in-Furness for the I.O.M. Steam Packet Company, and, up to the outbreak of war was the largest vessel employed by them on the Fleetwood-I.O.M. Service. 1:120 scale 787mm


Margaret Fast Cabin Cruiser

Margaret Fast Cabin Cruiser

Ref: L10/L11

Price: 28.80 / US$34.56 (US$ Tax Free Price)

Quantity:

Margaret Fast Cabin Cruiser, This design will appeal to the power boat man requiring a scale job of relatively simple construction, yet large enough to carry a really powerful plant and look well on a large sheet of water. The hull is of the hard chine type, planked in plywood on built up frames, and the drawings include all constructional details, with full size templates ready for laying off directly on to the material.

The hull is 48 in. on the waterline and the method of construction entirely obviates all risk of distortion during building or in the finished model, producing a very light yet strong ship. The external design is that of a modern fast cabin cruiser. 1:12 scale 1257mm


Elizabeth Fast Day Cruiser

Elizabeth Fast Day Cruiser

Ref: L14/L15

Price: 28.80 / US$34.56 (US$ Tax Free Price)

Quantity:

Elizabeth Fast Day Cruiser. The overall dimensions and method of construction are the same in this set as for MARGARET described above, but the general design is based on a modern day cruiser and therefore calls for a less elaborate superstructure. 1:12 scale 1257mm


Barbara Cabin Cruiser

Barbara Cabin Cruiser

Ref: L18/L19

Price: 28.80 / US$34.56 (US$ Tax Free Price)

Quantity:

Barbara Cabin Cruiser. The dimensions and construction of this model are as described for MARGARET elsewhere in this range, but the superstructure is arranged to suit steam or diesel plant. 1:12 scale 1257mm


R.M.S. Queen Elizabeth.

R.M.S. Queen Elizabeth.

Ref: L35/L37

Price: 43.20 / US$51.84 (US$ Tax Free Price)

Quantity:

R.M.S. Queen Elizabeth. The following drawings are intended for the construction of small scale working models of this famous vessel, although sufficient detail is given for showcase work if desired. The Lines Drawing has the underwater body increased out of scale to provide the necessary displacement. 1:384 scale 820mm


Union Castle Liner Edinburgh Castle

Union Castle Liner Edinburgh Castle

Ref: L40/L42

Price: 43.20 / US$51.84 (US$ Tax Free Price)

Quantity:

Union Castle Liner Edinburgh Castle. This set has been designed to a scale of 1:192 with the underwater body increased or a working model having a displacement of 6.5kg. 1193mm


Salvage Tug

Salvage Tug

Ref: L7/L9

Price: 33.30 / US$39.96 (US$ Tax Free Price)

Quantity:

Salvage Tug. The design of this model has been based upon the famous Dutch tug Zwarte Zee which, at the time of her completion in 1933, was the largest Salvage Tug afloat. 1:96 scale 673mm


Online Catalogue | Ship Plans |  Harold Underhill Powered Ship Plans

spacer
spacer