Superbly machined, these prop shafts consist of a brass tube and inner bearing housing with a stainless steel shaft. The outer bearing is made from Delrin and the inner bearing from sintered Bronze with a lipped G ring seal that make these tubes water tight. No lubrication is at all necessary. The front bearing assembly is removable allowing the tube to be cut down.
Overall tube length (including nut and collet): 150mm Overall shaft length: 186mm Tube dia: 6mm Inner bearing housing dia: 10mm Shaft dia 4mm plain with M4mm thread at both ends An M4 threaded coupling insert is also included. Maximum RPM: 10,000
The drawings described in this list have been produced to meet the needs of those wishing to build authentic scale models, and every care has been taken to ensure accurate detail. In the case of named ships they have been compiled from the original builders' plans and specifications, personal survey of the actual vessel, or both. Where possible, any changes made during the life of the ship have been noted on the drawings. The range mostly consists of 3 masted Clippers, smaller single and two masted British merchant vessels and a few 17th, 18th and 19th century sailing warships.
Please Note: Plans are printed to order and take about 14 days to print.