Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Cannon barrel V block

Cannon barrel V block

Cannon barrel V blocks. 15mm square. Bottom of groove is 7mm above the base.

find out more

2.60 / US$2.91

Signal Lamp (aldis) 10mm dia x 20mm high

Signal Lamp (aldis) 10mm dia x 20mm high

Signal Lamp (aldis) 10mm dia x 20mm high. etched and turned brass. Comes in kit form

find out more

3.00 / US$3.35

Fairey Huntress 23

Fairey Huntress 23

Fairey Huntress 23: An in-depth supporting article by the gifted designer Dave Milbourn, is published in the 2017 Model Boats Winter Special Edition.

With period charm in abundance, a build quality to admire and detailing that’s crisp The Fairey Huntress 23 is nautical indulgence, plain and simple. 584mm 1:12 scale

find out more

12.50 / US$13.96

Mahogany Sheet 3.0x100x1000mm

Mahogany Sheet 3.0x100x1000mm

Mahogany Sheet 3.0x100x1000mm

find out more

11.70 / US$13.07

Rudder hinge fits 4 to 5mm keels. 30mm long over the pair

Rudder hinge fits 4 to 5mm keels. 30mm long over the pair

Rudder hinge fits 4 to 5mm keels. 30mm long over the pair

find out more

2.95 / US$3.30

Oval hawse plate/Bulwark fairlead 13mm long (10)

Oval hawse plate/Bulwark fairlead 13mm long (10)

Oval hawse plate/Bulwark fairlead 13mm long x 8mm wide (10)

find out more

1.98 / US$2.21

Square Brass Rings 6.0mm square (10)

Square Brass Rings 6.0mm square (10)

Square Brass Rings 6.0mm square (10)

find out more

3.25 / US$3.63

Skylight hatch 24mm long x 19mm wide

Skylight hatch  24mm long x 19mm wide

Skylight hatch with 6 port lids 24mm long x 19mm wide

find out more

1.58 / US$1.77

spacer

Support Vessels

Online Catalogue | Ship Plans | Model Boats Magazine Plans |  Support Vessels

All plans on this page are printed to order. Details of how long this take will be Found here


Targa  Police Command & Tactical Support Vessel Targa Police Command & Tactical Support Vessel
Ref: MM2093
Targa Police Command & Tactical Support Vessel

The model is for radio control with a recommended single brushless motor power unit. Hull construction can be of either styrene foam or wood and the detailed full-size plans, with 3D views, show easily how to achieve this with either material. The cabin is made from styrene sheet. The accompanying full construction article was first published in the September 2014 issue of Model Boats and continued in the following two monthly issues and the model is recommended for those enthusiasts looking perhaps for their second more demanding project. Plan MM2093, drawn on two sheets.

Price: 13.00 / US$14.51 (US$ Tax Free Price)


Quantity:  


Shamrock Shamrock
Ref: MM1472
Shamrock: HM Customs and Excise launch of simple construction for single screw electric power

Price: 22.50 / US$25.13 (US$ Tax Free Price)


Quantity:  


Fireboat Elliot Fireboat Elliot
Ref: MM2066
Fireboat Elliot: A Glynn Guest design for a semi-scale r/c fireboat

This is a two sheet scale plan for an easy to construct radio controlled model. It is to an approximate scale of 1:32 producing a model just under 26 inches (660mm) long and is intended for radio control with twin electric drive motors. The plan was featured, together with accompanying constructional notes and photographs, in the October 2011 Model Boats magazine (No. 61/731). The model is simple to build and ideal for those who have already built a least one model boat.

Price: 12.50 / US$13.96 (US$ Tax Free Price)


Quantity:  


Seaforth Conqueror Seaforth Conqueror
Ref: MM1344
Seaforth Conqueror: An anchor handling tug supply ship at 1:75 scale, length 35 in Seaforth Conqueror: An anchor handling tug supply ship at 1:75 scale, length 35¼in. by 7in. beam. for twin electric drive. Model features fixed Kort nozzle and bow thruster. Plan includes side and plan views, rear view of superstructure, section along main cargo deck and full hull lines, plus suggested drive and R/C layout

Price: 13.00 / US$14.51 (US$ Tax Free Price)


Quantity:  


Grampian Pride Grampian Pride
Ref: MM1393
Grampian Pride: Standby Modern Rescue Vessel at 1:50 scale, model length 33in. Detailed drawings of a Norwegian built vessel now operating in the North Sea servicing oil platforms. No model construction details are included and the model is for experienced builders only.Three sheets

Price: 22.50 / US$25.13 (US$ Tax Free Price)


Quantity:  


Loyal Moderator Loyal Moderator
Ref: MM1303
Loyal Moderator: The popular class of fleet tenders drawn at 1:48 scale. Hull length 20ins. by beam 5½ins., displacement 5½lbs. Light construction is recommended; balsa hull and plasticard upperworks. Drawing includes side and deck views plus bodylines and colour scheme. No model construction details are shown

Price: 12.50 / US$13.96 (US$ Tax Free Price)


Quantity:  


Seaforth Clansman Seaforth Clansman
Ref: MM1308
Seaforth Clansman: A different and attractive subject, a North Sea Diving Support ship featuring fire monitors, bow and stern thrusters, Kort nozzles, moonpool, etc. Designed for twin electric motors, timber construction can be used, however styrene card is recommended

Price: 17.50 / US$19.54 (US$ Tax Free Price)


Quantity:  


Esk Harbour Esk Harbour
Ref: MM1386
Esk Harbour: Completely different model of the famous Whitby dredger. Hull length is 37in by 9½in beam, scale is 1:32. The detailed two sheet plan includes full lines, side elevations, plan and detailed views of parts of the superstructure. For single electric drive and radio control. For experienced modellers.

Price: 12.50 / US$13.96 (US$ Tax Free Price)


Quantity:  


RMAS Moorhen RMAS Moorhen
Ref: MM1467
R.M.A.S Moorhen: Detailed plans for a 1990s naval support vessel operated by the Royal Maritime Auxiliary Service. At a scale of 1:43 length is 29 in. (740mm) and beam 10 in. (250mm). Two large sheets.

Price: 18.50 / US$20.66 (US$ Tax Free Price)


Quantity:  


Online Catalogue | Ship Plans | Model Boats Magazine Plans |  Support Vessels

spacer
spacer