Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Eyebolt M1 Ball Ø:2mm Thread Length :10mm (Pack of 4)

Eyebolt M1 Ball :2mm Thread Length :10mm (Pack of 4)

Eyebolt M1 BallØ:2mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1mm. Pack of 4.

find out more

1.08 / US$1.16

Ships Horn Ø5mm L:15mm

Ships Horn 5mm L:15mm

Ships Horn Ø:5mm L:15mm: Bell tapers from Ø5 to 1.5mm along 11mm length. Diaphragm chamber Ø3.7mm length 4mm. Overall height (excluding fixing pin): 5.8mm, Fixing Pin Ø1mm, Fixing Pin Length 2.5mm. Pack of 2.

find out more

3.60 / US$3.87

Fire Monitor 45mm 1:50 Scale (Pack of 1)

Fire Monitor 45mm 1:50 Scale  (Pack of 1)

Fire Monitor 45mm 1:50 Scale (Pack of 1)
This working model of a water cannon can be
connected to a water pump for realistic action. The kit
consists of injection-moulded parts, a brass tube and silicone
tube. The water cannon can be rotated by means of a servo
and two different nozzles are included which produce
different kinds of water jets. The connector tube has a
diameter of Ø 4 mm,the jet nozzle has a diameter of Ø 2mm.
The water cannon can be painted as required.

find out more

20.10 / US$21.61

Radio Control In Model Boats by John Cundell

Radio Control In Model Boats by John Cundell

Radio Control In Model Boats by John Cundell Radio controlled model boating began to establish itself as a popular hobby in the 1950's and there was great excitement, even incredulity, among onlookers when they realised that a model was responding to commands sent from a radio transmitter. Nowadays a bystander is more surprised if a model does not have a radio! In the interim, the equipment used has made great strides, to the point where the customer simply has to plug in the batteries, switch on and it all works: no technical knowledge whatsoever is needed. However, guidance is needed to install the radio in the model and learn how to use it to its best advantage.

John Cundell is an author of many years’ experience at club, national and international level. In his capacity as editor of Model Boats magazine he is very aware of the sort of questions likely to be asked by the less experienced and, perhaps more importantly, knows the problem areas likely to be encountered by the unsuspecting newcomer.

Radio Control in Model Boats, first published in 1986, is a totally practical book and this revised edition brings you right up-to-date. If you follow carefully the simple procedures which arc clearly explained, you will undoubtedly be on the road to success in this fascinating hobby.

find out more

9.95 / US$12.84

PT Boat Crew Set 1:35 scale

PT Boat Crew Set 1:35 scale

PT Boat Crew Set 1:35 scale

Contains Ten WW2 crew members, of which two are officers. Arms and legs are separate from the body mouldings allowing various poses ro be made.

find out more

17.99 / US$19.34

Mtroniks High PowerMicro Switcher

Mtroniks High PowerMicro Switcher

The HP Switcher allows two accessories to be controlled in a momentary or latching action from one radio channel. This allows you to control either two auxilliaries from a sound module or even two stand alone items like LED lighting from one radio channel on your transmitter. 15amp capacity

find out more

39.98 / US$42.98

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

A round 16w daylight lamp with glass lens, featuring longer arms with sturdy joints for extra flexibility & positioning. Ideal for close-up intricate work.

Key Features
16 watt energy saving fluorescent tube (LC8076/T)
Cable length 1.5m
Electronic ballast - more energy efficient
Includes table clamp with cone holder foir extra stability
Long Reach Slim Line Magnifier Lamp
Quality 125mm (5") lens, 3 dioptre (1.75x mag.)
Removable sun protector cap
Shadow free light with low heat emission

find out more

64.94 / US$69.81

Fife. Scottish Drifter 1:32 scale 700mm

Fife. Scottish Drifter 1:32 scale 700mm

The Fifie is a type of fishing vessel developed on the east coast of Scotland. The kit has been designed specifically for any type of model maker, and as such it is a perfect kit for those who want and expect a little more. All fittings, masts and rig have been researched using contemporary sources and the most up to date reference material available to make the kit as accurate and as detailed as possible.

find out more

223.94 / US$240.74

spacer

DX Deck and Upgrade Packs

Online Catalogue | Plastic Kits & Accessories | MK1 Design Deck & Etched Metal Upgrades |  DX Deck and Upgrade Packs

DX2 Wooden deck & etch set for Arizona 1:200 scale DX2 Wooden deck & etch set for Arizona 1:200 scale
Ref: MD20019
DX2 Wooden deck & etch set for Arizona 1:200 scale. For Trumpeter Arizona kit

This DX2 kit contains a full set of precut wood laser etched deck sheets, 13 X Brass Photo Etched Parts, 1 X Pre-Painted Stainless Steel Photo Etched Part, 55 X Turned Metal Parts, 20 X Resin Parts and a full illustrated set of sheets showing the location of all the parts.

Price: 269.99 / US$290.24 (US$ Tax Free Price)


DX Wooden deck and etch set for HMS Hood 1:200 scale DX Wooden deck and etch set for HMS Hood 1:200 scale
Ref: MD20015
DX Wooden deck and etch set for HMS Hood 1:200 scale

The DX kits contains a full set of precut wood laser etched deck sheets, 21 sheets
of etched brass detail, 2 sheets of prepainted Etched brass detail, 157 turned
brass metal fittings, 48 cast resin detail fittings, 6 cast metal fittings chain
and a full illustrated set of sheets showing the location of all the parts.

Price: 268.80 / US$288.96 (US$ Tax Free Price)


Quantity:  


DX Wooden deck and etch set for HMS Rodney 1:200 scale DX Wooden deck and etch set for HMS Rodney 1:200 scale
Ref: MD20013
DX Wooden deck and etch set for HMS Rodney 1:200 scale. Intended as an upgrade for the Trumpeter kit.

The DX kits contains 5 sheets of precut wood laser etched deck sheets, 17 sheets of etched brass detail, 193 brass metal fittings, 25 cast resin detail fittings, chain and a full illustrated set of sheets showing the location of all the parts.

Price: 207.98 / US$223.58 (US$ Tax Free Price)


Quantity:  


DX Wooden deck and etch set for HMS Nelson 1:200 scale DX Wooden deck and etch set for HMS Nelson 1:200 scale
Ref: MD20010
DX Wooden deck and etch set for HMS Nelson 1:200 scale. Intended as an upgrade for the Trumpeter kit.

The DX kits contains 5 sheets of precut wood laser etched deck sheets, 20 sheets of etched brass detail, 280 brass metal fittings, 10 cast resin detail fittings, chain and a full illustrated set of sheets showing the location of all the parts.

Price: 199.99 / US$214.99 (US$ Tax Free Price)


Quantity:  




Related products:
1. Trumpeter HMS Nelson 1:200 scale 1082mm (Ref: TU03708)
DX Wooden deck and etch set for Hornet 1:200 scale DX Wooden deck and etch set for Hornet 1:200 scale
Ref: MD20007
DX Wooden deck and etched detail sheets for Hornet 1:200 scale. For Merit kit

The DX kit contains

Large Sized Full Wooden Deck, 20 X Large Sized Detailed Brass Photo Etched Parts, 2 X Pre-Painted Color Etched Part, 178 X Brass Metal Parts, 39 X Resin Parts, 25Cm Chain, 2 X 30Cm PVC Tube

Price: 238.40 / US$256.28 (US$ Tax Free Price)


Quantity:  




Related products:
1. Merit U.S.S. Hornet CV-8 1:200 scale (Ref: MM62001)
DX Wooden deck and etch set for Missouri 1:200 scale DX Wooden deck and etch set for Missouri 1:200 scale
Ref: MD20004
DX Wooden deckand etched detail sheets for Missouri 1:200 scale. For Trumpeter Missouri kit

The DX kits contains 12 sheets of precut laser etched deck sheets, 22 sheets of etched brass detail, 275 turned brass metal fittings, 31 cast resin detail fittings, chain and a full illustrated set of sheets showing the location of all the parts.

Price: 251.10 / US$269.93 (US$ Tax Free Price)


Quantity:  




Related products:
1. Trumpeter USS Missouri 1:200 scale 1352mm (Ref: TU03705)
DX Wooden deck & Etch set for Yamato 1:350 scale DX Wooden deck & Etch set for Yamato 1:350 scale
Ref: MD35024
DX Wooden deck & Etch set for Yamato 1:350 scale. For New Tamiya Yamato kit

Contains two sheets of wooden deck sheets. True scale butt spacing and nibbled plank margins. Amazing detail. Also included are five huge sheets of etched brass detail. Also included are turned metal barrels to replace all those plastic ones in the kit as well as many white metal castings

The deck sheets fits over standard kit deck and includes all cutouts for superstructure and deck fittings moulded into the kit deck.

Three colour fully illustrated sheets showing placement for all the componentry is also included.

Price: 143.99 / US$154.79 (US$ Tax Free Price)


DX Wooden deck & Etch set for Bismarck 1:200 scale DX Wooden deck & Etch set for Bismarck 1:200 scale
Ref: MD20002
DX Wooden deckand etched detail sheets for Bismarck 1:200 scale. For Trumpeter Bismarck kit

Contains all the components from the Wooden deck & Etch set (MD20003), Bismark Mast detail set (MS20001), Bismark Turret detail set (MS20002) and the Bismark Accessory detail set (MS20003)

As well as getting a discount on buying all four sets individually, this pack includes a bonus pack of water slide transfers.

Price: 199.20 / US$214.14 (US$ Tax Free Price)


Quantity:  


DX Wooden deck and Railing for Bismarck 1:350 scale DX Wooden deck and Railing for Bismarck 1:350 scale
Ref: MD35013
DX Wooden deck and Railing for Bismarck 1:350 scale. For Tamiya kit

Contains both fore and aft deck sheets plus additonal superstructure decking. Also included is a fret of stanchions and rails needed for the model.

Deck fits over standard kit deck and includes all cutouts for superstructure and deck fittings moulded into the kit deck.

Price: 36.80 / US$39.56 (US$ Tax Free Price)


Quantity:  


DX Wooden deck and Railing for Warspite 1:350 scale DX Wooden deck and Railing for Warspite 1:350 scale
Ref: MD35022
DX Wooden deck and Railing for Warspite 1:350 scale. For Academy kit

Contains both fore and aft deck sheets plus additonal superstructure decking. Also included is are 3 sheets of etched metal frets needed for the model, plus a full set of turned metal gun barrels

Deck fits over standard kit deck and includes all cutouts for superstructure and deck fittings moulded into the kit deck.

Price: 51.98 / US$55.88 (US$ Tax Free Price)


Online Catalogue | Plastic Kits & Accessories | MK1 Design Deck & Etched Metal Upgrades |  DX Deck and Upgrade Packs

spacer
spacer