Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Planet 2+2 4 Channel Transmitter and Receiver Set

Planet 2+2 4 Channel Transmitter  and Receiver Set

Planet 2+2 4 Channel Transmitter and Receiver Set

Single-axis throttle (up/down) and steering (left/right) sticks
Proportional steering and throttle control with adjustable dual rates
Digital trims on steering and throttle channels
Servo reversing on steering and throttle controls
Auxiliary channel with rotary dial (CH4)
Auxiliary channel with 3-position switch (CH3 )
2.4GHz AFHSS Proteus radio protocol
Tx charge port for rechargeable batteries (not included)

What's in the Box
1x Planet 2+2 transmitter
1x Planet Proteus 6-channel receiver
1x User manual

find out more

39.98 / US$42.32

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies, designed to be used with Revell kits) During the war, German submarines often stayed at sea for very long time and supplies of food and ammunition had to be taken aboard in large quantity, either when the submarine was in the port or even at sea from other supply ships or even supply submarines.Now, we are bringing these food and ammo crates in the form of a nicely detailed resin set, which can be used with other models too.

find out more

6.98 / US$7.39

Type VIII/IXC Stern Torpedo with loading winch and cart

Type VIII/IXC Stern Torpedo with loading winch and cart

Type VIII/IXC Stern Torpedo with loading winch and cart

Yet another of the world’s best resin cast sets tailored for German submarine models. This set is made for the U-Boot Type IX and enables the modeller to open the deck hatch which was used for loading rear torpedos into the submarine using an onboard winch. The master patterns were 3D designed, large parts are cast from resin and tiny parts which could not be produced by the means of resin casting are injection moulded into metal type moulds.

find out more

27.20 / US$28.79

Radiolink 8 channel Transmitter and two Receiver Set

Radiolink  8 channel Transmitter and two Receiver Set

Radiolink 8 channel Transmitter and two Receiver Set

Equipped with FHSS frequency-hopping spread spectrum protocol that offers a superior transmission rate, enhanced interference rejection and a secure full range capability. Perfect for all R/C disciplines from aircraft to quadcopters, through boats, cars and even trucks and locomotives, this is one transmitter that won’t be collecting dust. Take a look at the full feature-set and make special note of its low power consumption, ease of use, and, crucially, the fact that it’s supplied with two R8EF 8-channel receivers.

What's in the Box
1 x T8FB 2.4GHz 8-channel transmitter.
2 x R8EF 8-channel receivers.
1 x Throttle stick spring retainer.
1 x USB (standard) to USB (micro) lead.

Needed to Complete
4 x AA-size batteries for transmitter.

find out more

59.95 / US$63.45

1mm Plasticard Sheet 534mm long x 203mm

1mm Plasticard Sheet 534mm long x 203mm

1mm Plasticard Sheet 534mm long x 203mm

find out more

5.68 / US$6.01

Universal Motor mounting bracket

Universal Motor mounting bracket

Universal bracket with various mounting hole spacings. Fits all 540,545, & 600 sized motors motors without modification, and will accept 700 sized motors with a bit of filing

find out more

11.74 / US$12.42

Searchlight 6v 20mm dia plastic

Searchlight 6v 20mm dia plastic

2-directional working model, 6V /100mA, pack of 1,
Diameter: 20 mm Height: 34 mm

find out more

8.71 / US$9.22

Working Searchlight plastic 15mm dia 6v

Working Searchlight plastic 15mm dia 6v

Rotating and tilting searchlight with glazed lens, powerful 6V/100mA bulb, Diameter: 15 mm, Height: 24 mm, Cable length: approx.´100 mm

find out more

6.74 / US$7.14

spacer

DX Packs

Online Catalogue | Ship Fittings | MK1 Design |  DX Packs

DX2 Wooden deck & etch set for Arizona 1:200 scale DX2 Wooden deck & etch set for Arizona 1:200 scale
Ref: MD20019
DX2 Wooden deck & etch set for Arizona 1:200 scale. For Trumpeter Arizona kit

This DX2 kit contains a full set of precut wood laser etched deck sheets, 13 X Brass Photo Etched Parts, 1 X Pre-Painted Stainless Steel Photo Etched Part, 55 X Turned Metal Parts, 20 X Resin Parts and a full illustrated set of sheets showing the location of all the parts.

Price: 269.99 / US$285.74 (US$ Tax Free Price)


DX Wooden deck & etch set for Arizona 1:200 scale DX Wooden deck & etch set for Arizona 1:200 scale
Ref: MD20001
DX Wooden deck & etch set for Arizona 1:200 scale. For Trumpeter Arizona kit

Contains three sheets of precut wooden deck sections, and 5 sheets of assorted etched metal upgrade sheets.

Price: 151.20 / US$160.02 (US$ Tax Free Price)


Quantity:  


DX Wooden deck and etch set for HMS Hood 1:200 scale DX Wooden deck and etch set for HMS Hood 1:200 scale
Ref: MD20015
DX Wooden deck and etch set for HMS Hood 1:200 scale

The DX kits contains a full set of precut wood laser etched deck sheets, 21 sheets
of etched brass detail, 2 sheets of prepainted Etched brass detail, 157 turned
brass metal fittings, 48 cast resin detail fittings, 6 cast metal fittings chain
and a full illustrated set of sheets showing the location of all the parts.

Price: 268.80 / US$284.48 (US$ Tax Free Price)


Quantity:  


DX Wooden deck and etch set for Iowa 1:200 scale DX Wooden deck and etch set for Iowa 1:200 scale
Ref: MD20008
DX Wooden deckand etched detail sheets for Iowa 1:200 scale. For Trumpeter Iowa kit

The DX kits contains 11 sheets of precut laser etched deck sheets, 23 sheets of etched brass detail, 272 turned brass metal fittings, 31 cast resin detail fittings, chain and a full illustrated set of sheets showing the location of all the parts.

Price: 215.99 / US$228.59 (US$ Tax Free Price)


Quantity:  


DX Wooden deck and etch set for HMS Rodney 1:200 scale DX Wooden deck and etch set for HMS Rodney 1:200 scale
Ref: MD20013
DX Wooden deck and etch set for HMS Rodney 1:200 scale. Intended as an upgrade for the Trumpeter kit.

The DX kits contains 5 sheets of precut wood laser etched deck sheets, 17 sheets of etched brass detail, 193 brass metal fittings, 25 cast resin detail fittings, chain and a full illustrated set of sheets showing the location of all the parts.

Price: 207.98 / US$220.12 (US$ Tax Free Price)


Quantity:  


DX Wooden deck and etch set for HMS Nelson 1:200 scale DX Wooden deck and etch set for HMS Nelson 1:200 scale
Ref: MD20010
DX Wooden deck and etch set for HMS Nelson 1:200 scale. Intended as an upgrade for the Trumpeter kit.

The DX kits contains 5 sheets of precut wood laser etched deck sheets, 20 sheets of etched brass detail, 280 brass metal fittings, 10 cast resin detail fittings, chain and a full illustrated set of sheets showing the location of all the parts.

Price: 199.99 / US$211.66 (US$ Tax Free Price)


Quantity:  




Related products:
1. Trumpeter HMS Nelson 1:200 scale 1082mm (Ref: TU03708)
DX Wooden deck and etch set for Hornet 1:200 scale DX Wooden deck and etch set for Hornet 1:200 scale
Ref: MD20007
DX Wooden deck and etched detail sheets for Hornet 1:200 scale. For Merit kit

The DX kit contains

Large Sized Full Wooden Deck, 20 X Large Sized Detailed Brass Photo Etched Parts, 2 X Pre-Painted Color Etched Part, 178 X Brass Metal Parts, 39 X Resin Parts, 25Cm Chain, 2 X 30Cm PVC Tube

Price: 238.40 / US$252.31 (US$ Tax Free Price)


Quantity:  




Related products:
1. Merit U.S.S. Hornet CV-8 1:200 scale (Ref: MM62001)
DX Wooden deck and etch set for Missouri 1:200 scale DX Wooden deck and etch set for Missouri 1:200 scale
Ref: MD20004
DX Wooden deckand etched detail sheets for Missouri 1:200 scale. For Trumpeter Missouri kit

The DX kits contains 12 sheets of precut laser etched deck sheets, 22 sheets of etched brass detail, 275 turned brass metal fittings, 31 cast resin detail fittings, chain and a full illustrated set of sheets showing the location of all the parts.

Price: 251.10 / US$265.75 (US$ Tax Free Price)


Quantity:  




Related products:
1. Trumpeter USS Missouri 1:200 scale 1352mm (Ref: TU03705)
DX Wooden deck & Etch set for Yamato 1:350 scale DX Wooden deck & Etch set for Yamato 1:350 scale
Ref: MD35024
DX Wooden deck & Etch set for Yamato 1:350 scale. For New Tamiya Yamato kit

Contains two sheets of wooden deck sheets. True scale butt spacing and nibbled plank margins. Amazing detail. Also included are five huge sheets of etched brass detail. Also included are turned metal barrels to replace all those plastic ones in the kit as well as many white metal castings

The deck sheets fits over standard kit deck and includes all cutouts for superstructure and deck fittings moulded into the kit deck.

Three colour fully illustrated sheets showing placement for all the componentry is also included.

Price: 143.99 / US$152.39 (US$ Tax Free Price)


DX Wooden deck & Etch set for Bismarck 1:200 scale DX Wooden deck & Etch set for Bismarck 1:200 scale
Ref: MD20002
DX Wooden deckand etched detail sheets for Bismarck 1:200 scale. For Trumpeter Bismarck kit

Contains all the components from the Wooden deck & Etch set (MD20003), Bismark Mast detail set (MS20001), Bismark Turret detail set (MS20002) and the Bismark Accessory detail set (MS20003)

As well as getting a discount on buying all four sets individually, this pack includes a bonus pack of water slide transfers.

Price: 199.20 / US$210.82 (US$ Tax Free Price)


Quantity:  


DX Wooden deck and Railing for Bismarck 1:350 scale DX Wooden deck and Railing for Bismarck 1:350 scale
Ref: MD35013
DX Wooden deck and Railing for Bismarck 1:350 scale. For Tamiya kit

Contains both fore and aft deck sheets plus additonal superstructure decking. Also included is a fret of stanchions and rails needed for the model.

Deck fits over standard kit deck and includes all cutouts for superstructure and deck fittings moulded into the kit deck.

Price: 36.80 / US$38.95 (US$ Tax Free Price)


Quantity:  


DX Wooden deck and Railing for Warspite 1:350 scale DX Wooden deck and Railing for Warspite 1:350 scale
Ref: MD35022
DX Wooden deck and Railing for Warspite 1:350 scale. For Academy kit

Contains both fore and aft deck sheets plus additonal superstructure decking. Also included is are 3 sheets of etched metal frets needed for the model, plus a full set of turned metal gun barrels

Deck fits over standard kit deck and includes all cutouts for superstructure and deck fittings moulded into the kit deck.

Price: 51.98 / US$55.02 (US$ Tax Free Price)


Quantity:  


Online Catalogue | Ship Fittings | MK1 Design |  DX Packs

spacer
spacer