Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Planet 2+2 4 Channel Transmitter and Receiver Set

Planet 2+2 4 Channel Transmitter  and Receiver Set

Planet 2+2 4 Channel Transmitter and Receiver Set

Single-axis throttle (up/down) and steering (left/right) sticks
Proportional steering and throttle control with adjustable dual rates
Digital trims on steering and throttle channels
Servo reversing on steering and throttle controls
Auxiliary channel with rotary dial (CH4)
Auxiliary channel with 3-position switch (CH3 )
2.4GHz AFHSS Proteus radio protocol
Tx charge port for rechargeable batteries (not included)

What's in the Box
1x Planet 2+2 transmitter
1x Planet Proteus 6-channel receiver
1x User manual

find out more

39.98 / US$41.98

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies, designed to be used with Revell kits) During the war, German submarines often stayed at sea for very long time and supplies of food and ammunition had to be taken aboard in large quantity, either when the submarine was in the port or even at sea from other supply ships or even supply submarines.Now, we are bringing these food and ammo crates in the form of a nicely detailed resin set, which can be used with other models too.

find out more

6.98 / US$7.33

Type VIII/IXC Stern Torpedo with loading winch and cart

Type VIII/IXC Stern Torpedo with loading winch and cart

Type VIII/IXC Stern Torpedo with loading winch and cart

Yet another of the world’s best resin cast sets tailored for German submarine models. This set is made for the U-Boot Type IX and enables the modeller to open the deck hatch which was used for loading rear torpedos into the submarine using an onboard winch. The master patterns were 3D designed, large parts are cast from resin and tiny parts which could not be produced by the means of resin casting are injection moulded into metal type moulds.

find out more

27.20 / US$28.56

Radiolink 8 channel Transmitter and two Receiver Set

Radiolink  8 channel Transmitter and two Receiver Set

Radiolink 8 channel Transmitter and two Receiver Set

Equipped with FHSS frequency-hopping spread spectrum protocol that offers a superior transmission rate, enhanced interference rejection and a secure full range capability. Perfect for all R/C disciplines from aircraft to quadcopters, through boats, cars and even trucks and locomotives, this is one transmitter that won’t be collecting dust. Take a look at the full feature-set and make special note of its low power consumption, ease of use, and, crucially, the fact that it’s supplied with two R8EF 8-channel receivers.

What's in the Box
1 x T8FB 2.4GHz 8-channel transmitter.
2 x R8EF 8-channel receivers.
1 x Throttle stick spring retainer.
1 x USB (standard) to USB (micro) lead.

Needed to Complete
4 x AA-size batteries for transmitter.

find out more

59.95 / US$62.95

1mm Plasticard Sheet 534mm long x 203mm

1mm Plasticard Sheet 534mm long x 203mm

1mm Plasticard Sheet 534mm long x 203mm

find out more

5.68 / US$5.96

Universal Motor mounting bracket

Universal Motor mounting bracket

Universal bracket with various mounting hole spacings. Fits all 540,545, & 600 sized motors motors without modification, and will accept 700 sized motors with a bit of filing

find out more

11.74 / US$12.32

Searchlight 6v 20mm dia plastic

Searchlight 6v 20mm dia plastic

2-directional working model, 6V /100mA, pack of 1,
Diameter: 20 mm Height: 34 mm

find out more

8.71 / US$9.15

Working Searchlight plastic 15mm dia 6v

Working Searchlight plastic 15mm dia 6v

Rotating and tilting searchlight with glazed lens, powerful 6V/100mA bulb, Diameter: 15 mm, Height: 24 mm, Cable length: approx.´100 mm

find out more

6.74 / US$7.08

spacer

Easy Build Designs

Online Catalogue | Ship Plans | Marine Modelling Magazine Plans |  Easy Build Designs

All plans on this page are printed to order. Details of how long this take will be Found here


Iltis Fast Attack Craft Iltis Fast Attack Craft
Ref: MAR3619
Iltis Fast Attack Craft: The Iitis is a fast attack craft (torpedo) which was one of the smallest craft used to protect the East German coast during the 1960's. Designed by C. Halliwell.

The model is relatively easy to build out of balsa and plasticard

BEAM: 14cm
LENGTH: 71cm
SCALE: 1:24
RADIO FUNCTIONS: 2 channel

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


Pocomoko Pocomoko
Ref: MAR3012
Pocomoko: Chesapeake Bay fishing boat for small electric motor using balsa/ply or other timber. Length 580mm and beam 160mm. Designer Peter Massey.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


Zumwalt Zumwalt
Ref: MAR3155
Zumwalt: Free runner for electric powerbased on a USN design studyfor a Stealth type destroyer.All balsa and ply constructionlength 990 mm and beam 120mm. 380 size motor propruns in tunnel under hull.Could convert to R/C.Designer Charles Sells.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


FAC Missile Boat FAC Missile Boat
Ref: MAR3035
FAC Missile Boat: Simplified semi scale modern missile equipped fast patrol boats. Model is 740mm length and 180mm beam for a single 540 electric motor.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


Vigilant Vigilant
Ref: MAR2965
Freelance semiscale CoastGuard Cutter.Simplebalsa/ply/cardhull for singleor twin electricmotors. Modellength 465mmbeam 100mm.DesignerHal Harrison

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


AS Patrol Boat AS Patrol Boat
Ref: MAR2960
AS Patrol Boat: Semi scale model usingeither a balsa/ply hullor commercialalternative. Designbased on modernpatrol boat and hasfreelance weapons fitto choice at nominal1:48th scale. Length690mm beam 130mmsingle electric motor.Designer CliveHalliwell.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


HMS Penelope, 1070mm  WW2 cruiser HMS Penelope, 1070mm WW2 cruiser
Ref: MAR2050
HMS Penelope A 1070mm long, semi/scale model of the WW2 cruiser for two function r/c or straight running. An ideal first model warship

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


River Class Msf River Class Msf
Ref: MAR2156
River Class MSF For two or three-function r/c, this 1/48th semi scale model measuring 990mm by 200mm can be packed with detail. Designed by Steve Fosbury.

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


Betsy Bev Betsy Bev
Ref: MAR2170
Betsy Bev Measuring just 660mm by 255mm, this freelance pusher tug suits two function r/c and single motor (or more if required). Designed by Maurice Mould.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


USS Bostock USS Bostock
Ref: MAR2184
USS Bostock A semi/scale modern Destroyer, 918mm long, for small motors and two function r/c. Simple construction. Designed by Hal Harrison.

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


Trojan Trojan
Ref: MAR2220
Trojan A semi/scale modern Tug, 510mm long by 150mm beam, featuring balsa/card construction for two channel r/c. Designed by Hal Harrison.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


Vixen Vixen
Ref: MAR2336
Vixen A semi/scale Vosper style modern frigate, 920mm long by 100mm beam, of simplified construction from balsa, ply and card, intended for modellers who are less experienced and looking for an inexpensive scale type warship. Designed by Hal Harrison.

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


Malvern Trader Malvern Trader
Ref: MAR2387
Malvern Trader Semi scale coastal trader for building in balsa and card, with two channel radio and electric motor drive. All details shown on plan, with frame templates and isometric drawings of construction. At 625mm Loa, and 100mm beam. Designed by Hal Harrison.

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


Meteor Meteor
Ref: MAR2407
Meteor Simple to build in balsa and ply, this semi/scale 540 powered boat has a well designed underwater shape which gives a surprising turn of speed. Model size 510mm by 170mm. Designed by Hal Harrison.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


Clyde Puffer Puffin Clyde Puffer Puffin
Ref: MAR2420
Clyde Puffer Puffin: A semi/scale Clyde puffer, 460mm long by 100mm beam, for balsa, ply and card construction. Simplified underwater shape with ample displacement. Electric drive and 2 function r/c. Designed by Hal Harrison.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


Rhum Rhum
Ref: MAR2429
Rhum A near scale Islands Class Ferry, at 500mm long by 150mm beam. For twin motors and two function r/c. Ramp can be motorised. Designed by James Green.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


Hms Brush Hms Brush
Ref: MAR2441
HMS Brush A small minesweeper type, 510mm by 100mm, 1.25kg weight, for single 380 electric motor and two-function r/c. Balsa and card construction, a super starting point for beginners. Designed by Hal Harrison.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


Traplet Express Traplet Express
Ref: MAR2470
Traplet Express A semi/scale Ro-Ro ferry of modern lines. Of 750mm loa and 125mm beam, in balsa and card construction, a single electric motor and prop, and two function radio control. Cheap and easily built yet original in looks. Designed by Hal Harrison.

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


Pug, The Tug Pug, The Tug
Ref: MAR2480
Pug, The Tug A small twin electric powered tug. Size 380mm long by 140mm beam, for twin 385 motors. Simple balsa and card construction. Designed by Hal Harrison.

Price: 16.50 / US$17.33 (US$ Tax Free Price)


Quantity:  


Hms Romper Hms Romper
Ref: MAR2514
HMS Romper A semi/scale destroyer, of 700mm Loa by 75mm beam, of balsa and card construction. Single electric 380-size motor and two function radio control. Designed by Hal Harrison..

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


USS Gamon USS Gamon
Ref: MAR2532
USS Gamon A semi/scale aircraft carrier, length 740mm, beam 130mm, designed for single electric motor and two-function r/c. Balsa and card construction. Designed by Hal Harrison..

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


Mv Harmony Mv Harmony
Ref: MAR2570
MV Harmony A semi/scale cargo ship, length 770mm, beam 130mm. Balsa and card construction, for single electric motor and two function r/c. Designed by Hal Harrison

Price: 16.50 / US$17.33 (US$ Tax Free Price)


Quantity:  


KM Manfred KM Manfred
Ref: MAR2659
KM Manfred A semi/scale light cruiser of the 1900s, for balsa and card construction. Electric drive and two-function r/c required. At 1:100th scale approximately the model is of 910mm length and 100mm beam. Designed by Hal Harrison.

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


Shadow Shadow
Ref: MAR2678
Shadow Easy to build card and balsa model for 380 electric motor and 2 function radio.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


Traplet Trader Traplet Trader
Ref: MAR2680
Traplet Trader A semi/scale cargo ship of modern appearance. For balsa and card construction, electric drive and two-function r/c gear. Model is 920mm length and 105mm beam. Designed by Hal Harrison.

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


SS Wharncliffe SS Wharncliffe
Ref: MAR2776
SS Wharncliffe: Freelance steam powered cargo coaster, for card or balsa. Model is 610mm length and 100mm beam, and for single electric motor and two function RC. Designed by Hal Harrison.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


HMS Kilbury HMS Kilbury
Ref: MAR2802
HMS Kilbury Balsa and card semi-scale model of a KIL class patrol boat. Length 760mm and beam 140mm. Simple superstructure and easy access to motor and gear. Free plan in November 2000 MMI. Designed by Clive Halliwell.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


HMS Lysander HMS Lysander
Ref: MAR2824
HMS Lysander Freelance semi-scale Light Cruiser. 1010mm length and 100mm beam. Card, ply and balsa construction, based on a design for the Royal navy but never built. November 2001 MMI. Designed by Hal Harrison.

Price: 13.50 / US$14.18 (US$ Tax Free Price)


Quantity:  


Victoria Victoria
Ref: MAR2900
Victoria Semi scale Princess Class river gunboat. Balsa and ply construction. Model 765mm length and 150mm beam, with electric motor. at 1:48th scale so can use available commercial fittings. Free Plan in September 2001 MMI. Designer Clive Halliwell.

Price: 11.50 / US$12.07 (US$ Tax Free Price)


Quantity:  


Online Catalogue | Ship Plans | Marine Modelling Magazine Plans |  Easy Build Designs

spacer
spacer