Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Steam capstan Length: 56mm, Width: 38mm, Height: 34mm (Pack of 1)

Steam capstan Length: 56mm, Width: 38mm, Height: 34mm (Pack of 1)

Stern Capstan, Steam: Highly detailed stern capstan featuring twin horizontal cylinders, crossheads and crank discs, steam pipe with integral valve tap, worm gear detail. Main cover features open side and end viewing/access ports and integral pawl ratchet. Drum is fully detailed and includes simulated pawls. A mounting rack for the 6 bars is also supplied. Scale: 1:32, Length: 56mm, Width: 38mm, Height: 34mm. (Pack of 1)

find out more

24.96 / US$27.04

Stanchion Ball Top: Height: 6mm (Pack of 10)

Stanchion Ball Top: Height: 6mm (Pack of 10)

Stanchion Ball Top: Height: 6mm, Sprue Ø: 2.1mm, Sprue Hole Ø: 1.55mm, Ball Ø: 3mm, Ball Hole Ø: 1.55mm. (Pack of 10)

find out more

4.99 / US$5.41

Standing Pipe Vent Cap (Pack of 2)

Standing Pipe Vent Cap  (Pack of 2)

Standing Pipe Vent Cap: Height: 4.4mm, Cap Ø: 4.9mm, for 2.5mm dia pipe. (Pack of 2)

find out more

1.50 / US$1.63

Trumpeter HMS York Cruiser 500mm 1:350 scale

Trumpeter HMS York Cruiser 500mm 1:350 scale

Trumpeter HMS York Cruiser 500mm 1:350 scale

find out more

67.50 / US$73.13

Control Lever 3mm ball x 20.5mm long (Pack of 1)

Control Lever 3mm ball x 20.5mm long (Pack of 1)

Control Lever 3x20.5mm: Ball Ø: 3mm, Shaft Ø: 1.4mm, Length excluding fixing pin: 20.5mm, Fixing Pin Length: 3.5mm, Locating Pin Ø: 1.1mm (Pack of 1)

find out more

0.90 / US$0.98

Brass Shackle 4mm wide x 7mm high (Pack of 2)

Brass Shackle  4mm wide x 7mm high (Pack of 2)

Brass Shackle 4x7mm, M1 Threaded Pin: Working Shackle, Width: 4mm, Length: 7mm, Eye Ø: 2.5mm, Hole Ø: 1.05mm, Pin Thread: M1. (Pack of 2)

find out more

5.94 / US$6.44

Brass Shackle 4mm wide x 7mm high (Pack of 2)

Brass Shackle  4mm wide x 7mm high (Pack of 2)

Brass Shackle 5x8mm, 1mm Split Pin: Working Shackle, Width: 5mm, Length: 8mm, Eye Ø: 2.5mm, Hole Ø: 1.05mm, Split Pin Ø: 0.55mm (Pack of 2)

find out more

5.94 / US$6.44

Twin Working under-deck anchor winch

Twin Working under-deck anchor winch

Twin Working under-deck anchor winch 6V. Same as the K65310 but comes in kit form and has to be assembled. It also includes a servo, so just requires conecting to power and your receiver.

find out more

66.00 / US$71.50

spacer

Jecobin Plans

Online Catalogue | Ship Plans |  Jecobin Plans

These drawings have been carefully researched and drawn by Gerald L.Y.Hitch who is respected for the preparation of high standard scale drawings and as a
constructor of ship models.

The degree of detail suits the requirements of the advanced model maker as well as making these drawings of interest in their own right to those interested in ships.

The drawings were originally made to various scales with many being photographically or computer enlarged or reduced to other scales (as noted in the price lists). It should be noted that the photographic scale changes do not reproduce the same quality of line as tie original
drawing or as scale changes currently made by computer.

Extensive enlargements from the smaller "as drawn" scale may suffer a little in quality and there will not be the same amount of detail that there would have been if the drawing had been made at this scale. The range of scales include 1/192, 1/96, 1/72, 1/64, 1/48, 1/35, 1/24 and 1/128 but not all drawings are available in each scale.

The majority of drawings show full hull lines; the few that do not, have hull sections only but at sufficient intervals to enable satisfactory hull construction (many
models have been made from them).

Please Note: Plans are printed to order and take about 10 to 14 days to obtain.





Online Catalogue | Ship Plans |  Jecobin Plans

spacer
spacer