Fairlead (Curved): Marten, Howes & Baylis cast brass curved fairlead, Base 20x5mm, Height (excluding fixing pin) 6mm, Fairlead slot opening 7.3x2.8mm, Fairlead top opening 2.6mm. Supplied on a stem to allow easy polishing if desired stem may also be used as a fixing pin. Pack of 2.
4 to 8-cell fast charger (220-240v mains supply only)
A mains powered trickle charger that can be used to fast charge Nicad or Nimh battery packs at a 2ah rate Comes with polarised Deans Connector and and adaptor to allow connect to cells with the Tamiya 7.2v type socket
Example charge time of a 7.2V 3Ah pack would be around 1.5 hours
Motor Mount: Laser cut 12 Gauge (2.5mm) Aluminium motor mount for 700 Series Motors, Base (o/a) 75x65mm, Height (o/a) 50mm, Central hole opening Ø 17.8mm, Motor mounting holes Ø 4.3mm, Motor mounting hole centres 29mm. (Pack of 1)
This colour set can be used to paint light weapons and metallic parts. It contains two wood shades, three base colours for metallic surfaces and one special pot of "Reflecting Agent".
Instructions: mix over a palette your selected base colour with a small percentage of Reflecting Agent and apply the mixture with a brush or an airbrush that has a 0.3 needle and nozzle setup due to the thickness of the "Reflecting Agent". When dry polish with a stiff brush.
Being acrylic based, your brush or airbrush can be cleaned in water. When dry this acrylic paint is waterproof and suitable for working R/C models too.
1. Clean surfaces to be painted 2. For airbrushing, dilute the colour to a milky consistency using water or LifeColor Thinner. 3. Airbrush at very low pressures. 4. Apply colour in thin coats with a brush or airbrush 5. Allow to dry completely between coats 6. Clean your airbrush with airbrush cleaner and flush through with water