Fairlead (Curved): Marten, Howes & Baylis cast brass curved fairlead, Base 20x5mm, Height (excluding fixing pin) 6mm, Fairlead ‘slot’ opening 7.3x2.8mm, Fairlead ‘top’ opening 2.6mm. Supplied on a stem to allow easy polishing if desired – stem may also be used as a fixing pin. Pack of 2.
4 to 8-cell fast charger (220-240v mains supply only)
A mains powered trickle charger that can be used to fast charge Nicad or Nimh battery packs at a 2ah rate Comes with polarised Deans Connector and and adaptor to allow connect to cells with the Tamiya 7.2v type socket
Example charge time of a 7.2V 3Ah pack would be around 1.5 hours
Motor Mount: Laser cut 12 Gauge (2.5mm) Aluminium motor mount for 700 Series Motors, Base (o/a) 75x65mm, Height (o/a) 50mm, Central hole opening Ø 17.8mm, Motor mounting holes Ø 4.3mm, Motor mounting hole centres 29mm. (Pack of 1)
Made by Marx Luder, these waterproof shafts are fitted with 2 Libial seals and therefore do not rely on oil or grease for their water integrity. The stainless steel shafts run on 2 sintered bronze bearings with a central vibration damper, and a thrust race at the propeller end.
Please Note: Only Tube Size is Shown. The Shaft Length is Approx. 1in Longer.
