Fairlead (Curved): Marten, Howes & Baylis cast brass curved fairlead, Base 20x5mm, Height (excluding fixing pin) 6mm, Fairlead slot opening 7.3x2.8mm, Fairlead top opening 2.6mm. Supplied on a stem to allow easy polishing if desired stem may also be used as a fixing pin. Pack of 2.
4 to 8-cell fast charger (220-240v mains supply only)
A mains powered trickle charger that can be used to fast charge Nicad or Nimh battery packs at a 2ah rate Comes with polarised Deans Connector and and adaptor to allow connect to cells with the Tamiya 7.2v type socket
Example charge time of a 7.2V 3Ah pack would be around 1.5 hours
Motor Mount: Laser cut 12 Gauge (2.5mm) Aluminium motor mount for 700 Series Motors, Base (o/a) 75x65mm, Height (o/a) 50mm, Central hole opening Ø 17.8mm, Motor mounting holes Ø 4.3mm, Motor mounting hole centres 29mm. (Pack of 1)
APPLICATION: Much used in ships at greater risk from cavitation and vibration up to the 1970s. Passenger ships , faster cargo ships, frigates. After 1970 replaced by series with Skewed blades.. Max RPM 13000
WARNING: As of 23, September 2014 Raboesch decided to change both their code numbers and the way they describe the rotation of their props.
If you have purchased props in the past DO NOT use either the old code numbers or previous descriptions of prop rotation, as you won't get the prop you think you are ordering.
To avoid confusion we have changed the way we describe rotation for ALL makes of props we sell, so there is a consistent standard across all ranges
The current description now used is, if you stand at the STERN of the boat looking forward towards the BOW, a Right Hand or Clockwise rotation prop will push the boat forward.