Fairlead (Curved): Marten, Howes & Baylis cast brass curved fairlead, Base 20x5mm, Height (excluding fixing pin) 6mm, Fairlead slot opening 7.3x2.8mm, Fairlead top opening 2.6mm. Supplied on a stem to allow easy polishing if desired stem may also be used as a fixing pin. Pack of 2.
4 to 8-cell fast charger (220-240v mains supply only)
A mains powered trickle charger that can be used to fast charge Nicad or Nimh battery packs at a 2ah rate Comes with polarised Deans Connector and and adaptor to allow connect to cells with the Tamiya 7.2v type socket
Example charge time of a 7.2V 3Ah pack would be around 1.5 hours
Motor Mount: Laser cut 12 Gauge (2.5mm) Aluminium motor mount for 700 Series Motors, Base (o/a) 75x65mm, Height (o/a) 50mm, Central hole opening Ø 17.8mm, Motor mounting holes Ø 4.3mm, Motor mounting hole centres 29mm. (Pack of 1)
Superbly machined, these prop shafts consist of a brass tube and inner bearing housing with a stainless steel shaft. The outer bearing is made from Delrin and the inner bearing from Sintered bronze and a lipped G ring seal that make these tubes water tight. No lubrication is at all necessary. The front bearing assembly is removable allowing the tube to be cut down. The shaft being threaded at the prop end can also be shortened to suit.
The scale prop shaft unit ( RAB 301/13) contains an A frame bracket is in moulded high strength nylon with a brass bearings. The legs of the A frame are the common 60% angle and the 3rd leg can be removed to make an A frame, or the 2 legs can be removed to make a P bracket, a universal mounting for all exposed shafts.