Online Catalogue

View Cart | Checkout | Recent Orders | Items:, Value:

spacer
spacer

New Products

Warsaw Pact mechanics 1:48 scale (Pack of 2)

Warsaw Pact mechanics 1:48 scale  (Pack of 2)

Warsaw Pact mechanics 1:48 scale (Pack of 2)

Also ideal for any civilian merchant vessel up to about 1950. Contains two figures, both of which would be suitable as general crewmen, Figures come unpainted

find out more

11.50 / US$12.36

Trumpeter KM Bismarck 715mm 1:350 scale

Trumpeter KM Bismarck 715mm  1:350 scale

Trumpeter KM Bismarck 715mm 1:350 scale

15 sprues , hull and deck- the kit contains over 1200 parts, the hull made from two-directional slide molds, Deck wood pattern finely rendered, Contains display stand, 5 photo etched parts and full illustrated assembly instructions included

find out more

179.99 / US$193.49

Mast Band 6mm I/D (Pack of 10)

Mast Band 6mm I/D (Pack of 10)

Mast Band 6mm I/D. Drilled with two holes for eye fixing.

find out more

3.98 / US$4.28

Flexible Masking Tape 1mm wide x 18mtr (Pack of 2)

Flexible Masking Tape 1mm wide x 18mtr (Pack of 2)

Flexible Masking Tape 1mm wide x 18mtr (Pack of 2)

find out more

5.21 / US$5.60

Portholes/Dial Bezels chrome 4, 5, 6, 8 & 10mm dia

Portholes/Dial Bezels chrome  4, 5, 6, 8 & 10mm dia

VPH -Portholes/Dial Bezels chrome 4, 5, 6, 8 & 10mm diameter circular portholes in bright chrome print on clear self-adhesive vinyl

find out more

4.82 / US$5.19

Straight webbed bollard 40mm long x 19mm high (Pack of 2)

Straight webbed bollard  40mm long x 19mm high (Pack of 2)

3D printed Straight webbed bollard 40mm long x 19mm high (Pack of 2)

find out more

8.66 / US$9.31

Masking Tape Mixed pack 1, 2, 3 & 6mm wide x 18mtr (Pack of 1)

Masking Tape Mixed pack 1, 2, 3 & 6mm wide x 18mtr (Pack of 1)

Masking Tape Mixed pack 1, 2, 3 & 6mm wide x 18mtr (Pack of 1)

find out more

4.50 / US$4.84

Masking Tape 1mm wide x18mtr (Pack of 1)

Masking Tape 1mm wide x18mtr (Pack of 1)

Masking Tape 1mm wide x18mtr (Pack of 1)

find out more

1.76 / US$1.90

spacer

What's New

Online Catalogue |  What's New

capstan Caldercraft 3D printed Capstan 1:32

Highly detailed stern capstan featuring twin horizontal cylinders, crossheads and crank discs, steam pipe with integral valve tap, worm gear detail. Main cover features open side and end viewing/access ports and integral pawl ratchet. Drum is fully detailed and includes simulated pawls

Tell me more..
yorkTrumpeter HMS York Cruiser 1:350 scale

HMS York was the first of two York-class heavy cruisers built for the Royal Navy in the late 1920s. She mostly served on the North America and West Indies Station before World War II. She was eventually wrecked in an attack by the Italians in late 1941.

Tell me more...
winches Working Underdeck Winch

Twin Working under-deck anchor winch 6V. Same as the K65310 but comes in kit form and has to be assembled. It also includes a servo, so just requires conecting to power and your receiver.

Tell me more..
drumsCaldercraft Warping Drums

Two sizes of turned brass warping drums. Ideals for thouse building their own winch and windlasses. Come supplied in a packs of two.

Tell me more...
stanchions Caldercraft R.N pattern Tripple Stanchions
Caldercraft have just released some beautifully made Royal Navy pattern stanchions. Available in three scales of 1:96, 1:72 and 1:48 scales, these are turned in brass and come with a fixing pin and the balls are drilled to take the horizontal railing

Tell me more...
exeterTrumpeter HMS Exeter Cruiser 1:350 scale

HMS Exeter was the 2nd of the York-class heavy cruisers built during the late 1920s. During WW2 she was assigned to patrol South American waters against German commerce raiders. Exeter was one of three British cruisers that fought the German pocket battleship, the Admiral Graf Spee, later that year in the Battle of the River Plate. .

Tell me more...
winch1New 3D Printed Winch and Capstan

Hot on the heels of their new 3D printed cowl vents, are the first two of a new range of winches and capstans. All come in kit form and only requires minimal assembly.

Tell me more...
winchGraupner Winches

Graupner has started remaking a number of anchor and warping winches that were discontinued a few years ago. All come in kit form for user assembly.

Tell me more...
bottlescrewCaldercraft Bottlescrews

The lastest additions to Caldercraft's own range of fittings now included turned brass bottlescrews/turnbuckes/rigging screws. Available in seven sizes with body length ranging from 10mm to 22mm and 3mm diameter. Come supplies in packs of two

Tell me more...
cornwall Trumpeter HMS Cornwall. 1:350 scale

HMS cornwall in 1928 in Davenport shipyard completed, accepted the modernizing period 1935-38 and subsequently remained in service until 1941 at the local fleet. 1941-42 served in the Royal Navy in the East to fight with the Japanese fleet. HMS cornwall finally April 5, 1942 by the Japanese First Air Flotilla sank in waters southwest of Ceylon, Colombo.

Tell me more..
MHB Martin Howes and Baylis Fittings

This range of fittings is now available. Cast in Brass with a smooth matt finish, Can be left as is, or buffed for a highly polish finish.

Tell me more..
vents 3D Ventilators

Caldercraft ar slowly replacing their cast resin ventilators with 3D printed ones. 3D printing allows the vent hole to pass all the way through the centre of the upright stem, so faithfully following their full sized counterparts.

Tell me more..
flagstaffsCaldercraft Flagstaff sets

Six types of flagstaff kits containing a wood or tapered brass flagstaff; an angled, upright or flush base and a brass cap. The wooden versions will need to be cut down to your required size and tapered to suit. Come supplied in a pack of two.

Tell me more...
stanchions Back in Production: Robbe Stanchions
The 5 sizes of flat bar stanchions from Robber are now back in production. Available in a number of sizes and rail arrangements and come supplied in packs of 10.


Tell me more...
hornCaldercraft Ships Horns.

Fresh off the Caldercraft CNC machine is a range of 10 Ship's Horns sized from 9mm to 22mm long. Turned in brass and come in two horns per pack

Tell me more...
fireAeronaut Fire Monitors

This working model of a water cannon can be connected to a water pump for realistic action. The kit consists of injection-moulded parts, a brass tube and silicone tube. The water cannon can be rotated by means of a servo and two different nozzles are included which produce different kinds of water jets. Available in three sizes

Tell me more...
ptItaleri PT109 Crew set

Another addition to Italeri's 1:35 scale crew figure range. Intened for their PT109 kit, this pack of 10 figures will also suit any US naval PB at this scale.

Tell me more...
switcherMtroniks High PowerMicro Switcher

The HP Switcher allows two accessories to be controlled in a momentary or latching action from one radio channel. This allows you to control either two auxilliaries from a sound module or even two stand alone items like LED lighting from one radio channel on your transmitter. 15amp capacity

Tell me more...
lampLightcraft Slimline Illuminated Magnifier

A round 16w daylight lamp with glass lens, featuring longer arms with sturdy joints for extra flexibility & positioning. Ideal for close-up intricate work.

Tell me more...
fife Victory Models Fife

The lastest release from Victory Models. The Fifie is a type of fishing vessel developed on the east coast of Scotland. The kit has been designed specifically for any type of model maker, and as such it is a perfect kit for those who want and expect a little more. All fittings, masts and rig have been researched using contemporary sources and the most up to date reference material available to make the kit as accurate and as detailed as possible.

radioRadiolink 8 channel Combo

An easy to use, 8-channel, 2.4GHz entry-level radio system. Comes with two receivers allowing you to set up two model using the one handset.

Tell me more...

Online Catalogue |  What's New

spacer
spacer